Cisco XR 1200 series User Manual

Command History
ModificationRelease
This command was introduced.Release 3.4.1
Usage Guidelines
Use the clear logging onboard command to clear OBFL messages from all nodes. Use the clear logging
onboard command with the location node-id keyword and argument to clear OBFL messages for a specific
node. If the specified node is not present, an error message is displayed.
The clear logging onboard command permanently deletes all OBFL data for a node or for all nodes. Do
not clear the OBFL logs without specific reasons, because the OBFL data is used to diagnose and resolve
problems in FRUs.
Caution
If OBFL is actively running on a card, issuing the clear logging onboard command can result in a corrupt
or incomplete log at a later point in time. OBFL should always be disabled before this command is issued.
Caution
Task ID
OperationsTask ID
readlogging
Examples
In the following example, the OBFL data is cleared for all nodes in the system:
RP/0/0/CPU0:router(admin)# clear logging onboard
Related Commands
DescriptionCommand
Enables or disables OBFL.hw-module logging onboard , on page 356
Displays the OBFL messages.show logging onboard, on page 358
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 355
Onboard Failure Logging Commands
clear logging onboard

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English