132 Clock
User Guidelines
• Use the
sntp client enable
Interface Configuration mode command to enable the SNTP client on a
specific interface.
Examples
The following example enables the SNTP Broadcast clients.
sntp anycast client enable
The sntp anycast client enable Global Configuration mode command enables SNTP Anycast client. Use
the no form of this command to disable the SNTP Anycast client.
Syntax
• sntp anycast client enable
• no sntp anycast client enable
Default Configuration
The SNTP Anycast client is disabled.
Command Mode
Global Configuration mode.
User Guidelines
• Polling time is determined by the
sntp client poll timer
Global Configuration mode command.
• Use the
sntp client enable
Interface Configuration mode command to enable the SNTP client on a
specific interface.
Examples
The following example enables SNTP Anycast clients.
sntp client enable
The sntp client enable Global Configuration mode command enables the Simple Network Time
Protocol (SNTP) Broadcast and Anycast client on an interface. Use the no form of this command to
disable the SNTP client.
Console(config)# sntp broadcast client enable
console(config)# sntp anycast client enable
book.book Page 132 Thursday, December 18, 2008 7:40 PM