RMON Commands 323
The following table describes significant fields shown above:
show rmon history
The show rmon history User EXEC mode command displays RMON Ethernet history statistics.
Syntax
•
show rmon history
index
{
throughput
|
errors | other
} [
period
seconds
]
•
index
— Specifies the requested set of samples. (Range: 1 - 65535)
•
throughput
— Indicates throughput counters.
•
errors
— Indicates error counters.
•
other
— Indicates drop and collision counters.
•
seconds
— Specifies the period of time in seconds. (Range: 1 - 4294967295)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
There are no user guidelines for this command.
Field Description
Index An index that uniquely identifies the entry.
Interface The sampled Ethernet interface
Interval The interval in seconds between samples.
Requested Samples The requested number of samples to be saved.
Granted Samples The granted number of samples to be saved.
Owner The entity that configured this entry.
book.book Page 323 Thursday, December 18, 2008 7:40 PM