76 Command Modes
SP (SSH Public Key) Mode
UE (User EXEC) Mode
show snmp filters Displays the configuration of SNMP filters.
show snmp groups Displays the configuration of SNMP groups.
show snmp users Displays the configuration of SNMP users.
show snmp views Displays the configuration of SNMP views.
show sntp configuration Shows the configuration of the Simple Network Time Protocol (SNTP).
show sntp status Shows the status of the Simple Network Time Protocol (SNTP).
show spanning-tree Displays Spanning Tree configuration.
show startup-config Displays the startup configuration file contents.
show syslog-servers Displays the syslog servers settings.
show tacacs Displays configuration and statistics for a TACACS+ servers.
show users accounts Displays information about the local user database.
show users login-history Displays information about the login history of users.
show vlan Displays VLAN information.
show vlan internal usage Displays a list of VLANs used internally by the device.
show vlan mac-to-vlan Displays the MAC-to-VLAN database.
show vlan protocols-groups Displays protocols-groups information.
stack reload Reloads stack members.
test copper-port tdr Diagnoses with TDR (Time Domain Reflectometry) technology the
quality and characteristics of a copper cable attached to a port.
Command Group Description
key-string Manually specifies a SSH public key.
user-key Specifies which SSH public key is manually configured and enters the
SSH public key-string configuration command.
Command Group Description
enable Enters the Privileged EXEC mode.
exit Closes an active terminal session by logging off the device.
login Changes a login username.
book.book Page 76 Thursday, December 18, 2008 7:40 PM