LLDP Commands 263
Example
The following example displays the Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery
(MED) configuration.
show lldp local
To display the Link Layer Discovery Protocol (LLDP) information that is advertised from a specific port,
use the show lldp local command in privileged EXEC mode.
Syntax
• show lldp local ethernet interface
•
Interface
— Ethernet port
Command Modes
Privileged EXEC mode.
console# show lldp med configuration
Network policy 1
-------------------
Application type: Voice
VLAN ID: 2 tagged
Layer 2 priority: 0
DSCP: 0
Port Capabilities Network Policy Location PoE
---------- ---------- ---------- -------- ----
1/e1 Yes Yes: 1 Yes Yes
1/e2 Yes Yes: 1 Yes Yes
1/e3 Yes No No Yes
console# show lldp med configuration ethernet 1/1
Port Capabilities Network Policy Location PoE
---------- ---------- ---------- -------- ----
1/e1 Yes Yes: 1 Yes Yes
book.book Page 263 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
