Dell PowerConnect 3524 User Manual

Command Groups 35
AAA Commands
ACL Commands
Command Group Description Access Mode
aaa authentication login Defines login authentication. Global
Configuration
aaa authentication enable Defines authentication method lists for accessing higher
privilege levels.
Global
Configuration
login authentication Specifies the login authentication method list for a
remote telnet or console.
Line
Configuration
enable authentication Specifies the authentication method list when accessing a
higher privilege level from a remote telnet or console.
Line
Configuration
ip http authentication Specifies authentication methods for HTTP server users. Global
Configuration
ip https authentication Specifies authentication methods for HTTPS server users. Global
Configuration
show authentication
methods
Displays information about the authentication methods. Privileged EXEC
password Specifies a password on a line. Line
Configuration
enable password Sets a local password to control access to normal and
privilege levels.
Global
Configuration
username Establishes a username-based authentication system. Global
Configuration
Command Group Description Access Mode
ip access-list Creates Layer 2 ACLs. Global
Configuration
permit (IP) Permits traffic if the conditions defined in the
permit statement match.
IP Access-List
Configuration
deny (IP) Denies traffic if the conditions defined in the deny
statement match.
IP Access-List
Configuration
mac access-list Creates Layer 2 ACLs. Global
Configuration
permit (MAC) Set permit conditions for a MAC access list MAC Access-List
Configuration
book.book Page 35 Thursday, December 18, 2008 7:40 PM

Dell PowerConnect 3524 Specifications

General

Throughput	9.5 Mpps
Number of queues	4
MAC address table	8000 entries
Maximum data transfer rate	0.1 Gbit/s
Supported data transfer rates	10/100 Mbps
10G support	No
Number of VLANs	256
Flow control support	Yes
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad
Input frequency	50/60 Hz
Weight (imperial)	11 lbs
Dimensions (WxDxH)	440 x 257 x 43.2 mm
Networking features	Gigabit Ethernet, Fast Ethernet
Authentication method	RADIUS, TACACS+
Connectivity technology	Wired
Dimensions (W x D x H) (imperial)	17.3 x 10.12 x 1.7 \
Switch type	Managed
Switch layer	L2
Data link protocols	Ethernet
Supported network protocols	HTTP, HTTPS/SSL, SSH
Power connector	DC-in jack
Gigabit Ethernet (copper) ports quantity	2
Basic switching RJ-45 Ethernet ports quantity	24
Product color	Black
Power source	AC
Input voltage	100 - 240 V
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	5000 g