Clock 135
sntp unicast client poll
The sntp unicast client poll Global Configuration mode command enables polling for the Simple
Network Time Protocol (SNTP) predefined Unicast servers. Use the no form of this command to disable
the polling for SNTP client.
Syntax
• sntp unicast client poll
• no sntp unicast client poll
Default Configuration
Polling is disabled.
Command Mode
Global Configuration mode.
User Guidelines
• Polling time is determined by the
sntp client poll timer
Global Configuration mode command.
Examples
The following example enables polling for Simple Network Time Protocol (SNTP) predefined
Unicast clients.
sntp server
The sntp server Global Configuration mode command configures the device to use the Simple Network
Time Protocol (SNTP) to request and accept SNTP traffic from a specified server. Use the no form of
this command to remove a server from the list of SNTP servers.
Console(config)# sntp unicast client poll
book.book Page 135 Thursday, December 18, 2008 7:40 PM