46 Command Groups
Login Banner Commands
Management ACL Commands
lldp med network-
policy (interface)
Attaches a LLDP MED network policy to a port. Interface configuration
(Ethernet)
lldp med location Interface configuration
(Ethernet)
clear lldp rx Restarts the LLDP RX state machine and clears the
neighbors table.
Privileged EXEC
show lldp
configuration
Displays the LLDP configuration. Privileged EXEC
show lldp med
configuration
Displays the Link Layer Discovery Protocol (LLDP)
Media Endpoint Discovery (MED) configuration.
Privileged EXEC
show lldp local Displays the Link Layer Discovery Protocol (LLDP)
information that is advertised from a specific port.
Privileged EXEC
show lldp neighbors Displays information about discovered neighboring
devices using Link Layer Discovery Protocol (LLDP)
Privileged EXEC
Command Group Description Access Mode
banner exec Specifies and enables a message to be displayed
when an EXEC process is created.
Global Configuration
banner login Enables a message to be displayed before the
username and password login prompts.
Global Configuration
banner motd Specifies and enables a message-of-the-day banner.. Global Configuration
exec-banner Enables the display of exec banners. Line Configuration
login-banner Enables the display of login banners. Line Configuration
motd-banner Enables the display of message-of-the-day banners. Line Configuration
show banner Displays the banners configuration. Privileged EXEC
Command Group Description Access Mode
management access-list Defines a management access-list, and enters the
access-list for configuration.
Global Configuration
permit (Management) Defines a permit rule. Management Access-level
deny (Management) Defines a deny rule. Management Access-level
book.book Page 46 Thursday, December 18, 2008 7:40 PM