230 IPv6 Addressing
Example
The following example displays IPv6 neighbor discovery cache information.
clear ipv6 neighbors
The clear ipv6 neighbors
Privileged EXEC
mode command deletes all entries in the IPv6 neighbor
discovery cache, except static entries.
Syntax
• clear ipv6 neighbors
Default Configuration
This command has no default setting.
Command Mode
Privileged EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example deletes all entries in the IPv6 neighbor discovery cache, except static entries.
Console# show ipv6 neighbors dynamic
Interface IPv6 address HW address State
------- ---------- --------- -------
VLAN 1 2031:0:130F::010:B504:DBB4 00:10:B5:04:DB:4B REACH
VLAN 1 2031:0:130F::050:2200:2AA4 00:50:22:00:2A:A4 REACH
Console> clear ipv6 neighbors
book.book Page 230 Thursday, December 18, 2008 7:40 PM