334 RMON Commands
The following table describes the significant fields shown in the display:
rmon table-size
The rmon table-size Global Configuration mode command configures the maximum size of RMON
tables. Use the no form of this command to return to the default configuration.
Syntax
•
rmon table-size
{
history
entries
|
log
entries
}
•
no rmon table-size
{
history
|
log
}
•
history
entries
— Maximum number of history table entries. (Range: 20 - 270)
•
log
entries
— Maximum number of log table entries. (Range: 20 - 100)
Default Configuration
• History table size is 270.
• Log table size is 200.
Command Mode
Global Configuration mode.
User Guidelines
The configured table size takes effect after the device is rebooted.
Example
The following example configures the maximum RMON history table sizes to 100 entries.
Field Description
Event An index that uniquely identifies the event.
Description A comment describing this event.
Time The time this entry was created.
Console(config)# rmon table-size history 100
book.book Page 334 Thursday, December 18, 2008 7:40 PM
To Next Page
Need help?
General
Weight and Dimensions
