RMON Commands 321
rmon collection history
The rmon collection history Interface Configuration (Ethernet, port-channel) mode command enables
a Remote Monitoring (RMON) MIB history statistics group on an interface. Use the no form of this
command to remove a specified RMON history statistics group.
Syntax
•
rmon
collection history
index
[
owner
ownername
] [
buckets
bucket-number
] [
interval
seconds
]
•
no rmon collection history
index
•
index
— Specifies the statistics group index. (Range: 1 - 65535)
•
ownername
— Specifies the RMON statistics group owner name.
•
bucket-number
— Number of buckets specified for the RMON collection history group of
statistics. If unspecified, defaults to 50. (Range: 1 - 50)
•
seconds
— Number of seconds in each polling cycle. (Range: 1 - 3600)
Default Configuration
• RMON statistics group owner name is an empty string.
• Number of buckets specified for the RMON collection history statistics group is 50.
• Number of seconds in each polling cycle is 1800.
Command Mode
Interface Configuration (Ethernet, port-channel) mode.
User Guidelines
Cannot be configured for a range of interfaces (range context).
128 to 255 Octets The total number of packets (including bad packets) received that are between
128 and 255 octets in length inclusive (excluding framing bits but including FCS
octets).
256 to 511 Octets The total number of packets (including bad packets) received that are between
256 and 511 octets in length inclusive (excluding framing bits but including FCS
octets).
512 to 1023 Octets The total number of packets (including bad packets) received that are between
512 and 1023 octets in length inclusive (excluding framing bits but including
FCS octets).
1024 to 1632 Octets The total number of packets (including bad packets) received that are between
1024 and 1632 octets in length inclusive (excluding framing bits but including
FCS octets).
book.book Page 321 Thursday, December 18, 2008 7:40 PM