Dell PowerConnect 3524 User Manual

320 RMON Commands
The following table describes significant fields shown above:
Fragments: 0 Jabbers: 0
64 Octets: 0 65 to 127 Octets: 0
128 to 255 Octets: 0 256 to 511 Octets: 0
512 to 1023 Octets: 0 1024 to max Octets: 0
Field Description
Octets The total number of octets of data (including those in bad packets) received on
the network (excluding framing bits but including FCS octets).
Packets The total number of packets (including bad packets, Broadcast packets, and
Multicast packets) received.
Broadcast The total number of good packets received and directed to the Broadcast address.
This does not include Multicast packets.
Multicast The total number of good packets received and directed to a Multicast address.
This number does not include packets directed to the Broadcast address.
CRC Align Errors The total number of packets received with a length (excluding framing bits, but
including FCS octets) of between 64 and 1632 octets, inclusive, but with either a
bad Frame Check Sequence (FCS) with an integral number of octets (FCS
Error) or a bad FCS with a non-integral number of octets (Alignment Error).
Collisions The best estimate of the total number of collisions on this Ethernet segment.
Undersize Pkts The total number of packets received less than 64 octets long (excluding framing
bits, but including FCS octets) and otherwise well formed.
Oversize Pkts The total number of packets received longer than 1632 octets (excluding framing
bits, but including FCS octets) and otherwise well formed.
Fragments The total number of packets received less than 64 octets in length (excluding
framing bits but including FCS octets) and either a bad Frame Check Sequence
(FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-
integral number of octets (Alignment Error).
Jabbers The total number of packets received longer than 1632 octets (excluding framing
bits, but including FCS octets), and either a bad Frame Check Sequence (FCS)
with an integral number of octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
64 Octets The total number of packets (including bad packets) received that are 64 octets
in length (excluding framing bits but including FCS octets).
65 to 127 Octets The total number of packets (including bad packets) received that are between 65
and 127 octets in length inclusive (excluding framing bits but including FCS
octets).
book.book Page 320 Thursday, December 18, 2008 7:40 PM

Dell PowerConnect 3524 Specifications

General

Throughput	9.5 Mpps
Number of queues	4
MAC address table	8000 entries
Maximum data transfer rate	0.1 Gbit/s
Supported data transfer rates	10/100 Mbps
10G support	No
Number of VLANs	256
Flow control support	Yes
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad
Input frequency	50/60 Hz
Weight (imperial)	11 lbs
Dimensions (WxDxH)	440 x 257 x 43.2 mm
Networking features	Gigabit Ethernet, Fast Ethernet
Authentication method	RADIUS, TACACS+
Connectivity technology	Wired
Dimensions (W x D x H) (imperial)	17.3 x 10.12 x 1.7 \
Switch type	Managed
Switch layer	L2
Data link protocols	Ethernet
Supported network protocols	HTTP, HTTPS/SSL, SSH
Power connector	DC-in jack
Gigabit Ethernet (copper) ports quantity	2
Basic switching RJ-45 Ethernet ports quantity	24
Product color	Black
Power source	AC
Input voltage	100 - 240 V
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	5000 g