72 Command Modes
LC (Line Configuration) Mode
MA (Management Access-level) Mode
MC (MST Configuration) Mode
switchport trunk allowed vlan Adds or removes VLANs from a port in general mode.
switchport trunk native vlan Defines the port as a member of the specified VLAN, and the VLAN ID
is the "port default VLAN ID (PVID)".
traffic-shape Sets the shaper on an egress port.
Command Group Description
autobaud Configures the line for automatic baud rate detection (autobaud)
enable authentication Specifies the authentication method list when accessing a higher
privilege level from a remote telnet or console.
exec-timeout Configures the interval that the system waits until user input is
detected.
history Enables the command history function.
history size Configures the command history buffer size for a particular line.
login authentication Specifies the login authentication method list for a remote telnet or
console.
password Specifies a password on a line.
password-aging Sets the expiration time of line passwords in the local database.
speed Configures the baud rate of the line.
Command Group Description
deny (Management) Defines a deny rule.
permit (Management) Defines a permit rule.
Command Group Description
abort (mst) Exits the MST region configuration mode without applying
configuration changes.
exit (mst) Exits the MST region configuration mode and applies all configuration
changes.
book.book Page 72 Thursday, December 18, 2008 7:40 PM