GVRP Commands 183
GVRP Commands
gvrp enable (Global)
GARP VLAN Registration Protocol (GVRP) is an industry-standard protocol designed to propagate
VLAN information from device to device. With GVRP, a single device is manually configured with
all desired VLANs for the network, and all other devices on the network learn these VLANs
dynamically.
The gvrp enable Global Configuration mode command enables GVRP globally. Use the no form of
this command to disable GVRP on the device.
Syntax
• gvrp enable
• no gvrp enable
Default Configuration
GVRP is globally disabled.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example enables GVRP globally on the device.
gvrp enable (Interface)
The gvrp enable Interface Configuration (Ethernet, port-channel) mode command enables GVRP
on an interface. Use the no form of this command to disable GVRP on an interface.
Console(config)# gvrp enable
book.book Page 183 Thursday, December 18, 2008 7:40 PM