Command Groups 49
RADIUS Commands
qos map dscp-queue Modifies the DSCP to CoS map. Global
Configuration
qos trust (Global) Configures the system to basic mode and the "trust"
state.
Global
Configuration
qos trust (Interface) Enables each port trust state. Interface
Configuration
qos cos Configures the default port CoS value. Interface
Configuration
show qos map Displays all the maps for QoS. User EXEC
Command Group Description Access Mode
radius-server host Specifies a RADIUS server host. Global
Configuration
radius-server key Sets the authentication and encryption key for all
RADIUS communications between the device and
the RADIUS daemon.
Global
Configuration
radius-server
retransmit
Specifies the number of times the software searches
the list of RADIUS server hosts.
Global
Configuration
radius-server source-ip Specifies the source IP address used for
communication with RADIUS servers.
Global
Configuration
radius-server source-
ipv6
Specifies the source IPv6 address used for the IPv6
communication with RADIUS servers.
Global
Configuration
radius-server timeout Sets the interval for which a device waits for a server
host to reply.
Global
Configuration
radius-server deadtime Improves RADIUS response times when servers are
unavailable.
Global
Configuration
show radius-servers Displays the RADIUS server settings. Privileged EXEC
book.book Page 49 Thursday, December 18, 2008 7:40 PM