50 Command Groups
RMON Commands
SNMP Commands
Command Group Description Mode
show rmon statistics Displays RMON Ethernet Statistics. User EXEC
rmon collection history Enables a Remote Monitoring (RMON) MIB history
statistics group on an interface.
Interface
Configuration
show rmon collection
history
Displays the requested history group configuration. User EXEC
show rmon history Displays RMON Ethernet statistics history. User EXEC
rmon alarm Configures alarm conditions. Global
Configuration
show rmon alarm-table Displays the alarms table. User EXEC
show rmon alarm Displays alarm configurations. User EXEC
rmon event Configures a RMON event. Global
Configuration
show rmon events Displays the RMON event table. User EXEC
show rmon log Displays the RMON logging table. User EXEC
rmon table-size Configures the maximum RMON tables sizes. Global
Configuration
Command Group Description Access Mode
snmp-server
community
Sets up the community access string to permit
access to SNMP protocol.
Global
Configuration
snmp-server view Creates and modifies view entries. Global
Configuration
snmp-server group Configures a new SNMP group or a table that maps
SNMP users to SNMP views.
Global
Configuration
snmp-server user Configures a new SNMP v3 user. Global
Configuration
snmp-server engineID
local
Specifies an SNMP EngineID on the local device. Global
Configuration
snmp-server enable
traps
Enables the device to send SNMP traps or SNMP
notifications.
Global
Configuration
book.book Page 50 Thursday, December 18, 2008 7:40 PM