VLAN Commands 469
VLAN Commands
vlan database
The vlan database Global Configuration mode command enters the VLAN Configuration mode.
Syntax
• vlan database
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example enters the VLAN database mode.
vlan
The vlan VLAN Configuration mode command creates a VLAN. Use the no form of this command
to delete a VLAN.
Syntax
•
vlan
vlan-range
•
no vlan
vlan-range
•
vlan-range
— Specifies a list of VLAN IDs to be added. Separate non-consecutive VLAN IDs
with a comma and no spaces; a hyphen designates a range of IDs.
Console(config)# vlan database
Console(config-vlan)#
book.book Page 469 Thursday, December 18, 2008 7:40 PM