470 VLAN Commands
Default Configuration
This command has no default configuration.
Command Mode
VLAN Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example VLAN number 1972 is created.
interface vlan
The interface vlan Global Configuration mode command enters the Interface Configuration (VLAN)
mode.
Syntax
•
interface vlan
vlan-id
•
vlan-id
— Specifies an existing VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example enters Interface Configuration mode for VLAN 1.
Console(config)# vlan database
Console(config-vlan)# vlan 1972
Console(config)# interface vlan 1
Console(config-if)#
book.book Page 470 Thursday, December 18, 2008 7:40 PM