Dell PowerConnect 3524 User Manual

34 Command Groups
Ethernet Configuration Configures all port configuration options for, example ports,
storm control, and auto-negotiation.
GVRP Commands Configures and displays GVRP configuration and information.
IGMP Snooping Commands Configures IGMP snooping and displays IGMP configuration
and IGMP information.
IP Addressing Commands Configures and manages IP addresses on the device.
IPv6 Addressing Commands Configures and manages IPv6 addresses on the device.
LACP Commands Configures and displays LACP information.
Line Commands Configures the console and remote Telnet connection.
LLDP Commands Configures and displays LLDP information.
Login Banner Commands Cofigures customizable login banners on the device.
Management ACL Commands Configures and displays management access-list information.
PHY Diagnostics Commands Diagnoses and displays the interface status.
Power-over-Ethernet Commands Configure Power over Ethernet setings on the device.
Port Channel Commands Configures and displays Port Channel information.
Port Monitor Commands Monitors activity on specific target ports.
QoS Commands Configures and displays QoS information.
RADIUS Commands Configures and displays RADIUS information.
RMON Commands Displays RMON statistics.
SNMP Commands Configures SNMP communities, traps and displays SNMP
information.
Spanning Tree Commands Configures and reports on Spanning Tree protocol.
SSH Commands Configures SSH authentication.
Syslog Commands Manages and displays syslog messages.
System Management Commands Configures the device clock, name and authorized users.
TACACS Commands Configures TACACS+ commands.
TIC Commands Configures and displays TIC information.
Tunnel Commands Configures tunnel routing configurations.
User Interface Commands Describes user commands used for entering CLI commands.
VLAN Commands Configures VLANs and displays VLAN information.
Voice VLAN Commands Configures Voice VLANs and displays VLAN information.
Configures Web based access to the device.
802.1x Commands Configures commands related to 802.1x security protocol.
book.book Page 34 Thursday, December 18, 2008 7:40 PM

Dell PowerConnect 3524 Specifications

General

Throughput	9.5 Mpps
Number of queues	4
MAC address table	8000 entries
Maximum data transfer rate	0.1 Gbit/s
Supported data transfer rates	10/100 Mbps
10G support	No
Number of VLANs	256
Flow control support	Yes
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad
Input frequency	50/60 Hz
Weight (imperial)	11 lbs
Dimensions (WxDxH)	440 x 257 x 43.2 mm
Networking features	Gigabit Ethernet, Fast Ethernet
Authentication method	RADIUS, TACACS+
Connectivity technology	Wired
Dimensions (W x D x H) (imperial)	17.3 x 10.12 x 1.7 \
Switch type	Managed
Switch layer	L2
Data link protocols	Ethernet
Supported network protocols	HTTP, HTTPS/SSL, SSH
Power connector	DC-in jack
Gigabit Ethernet (copper) ports quantity	2
Basic switching RJ-45 Ethernet ports quantity	24
Product color	Black
Power source	AC
Input voltage	100 - 240 V
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	5000 g