Command Modes 77
ping Sends ICMP echo request packets to another node on the network.
resume Switches to another open Telnet session.
show clock Displays the time and date from the system clock.
show copper-ports cable-length Displays the estimated copper cable length attached to a port.
show copper-ports tdr Displays the last TDR (Time Domain Reflectometry) tests on specified
ports.
show gvrp configuration Displays GVRP configuration information.
show gvrp error-statistics Displays GVRP error statistics.
show gvrp statistics Displays GVRP statistics.
show history Lists the commands entered in the current session.
show ip dhcp snooping Displays the DHCP snooping configuration.
show ip dhcp snooping binding Displays the DHCP snooping binding database and configuration
information for all interfaces on a switch.
show ip igmp snooping groups Displays Multicast groups learned by IGMP snooping.
show ip igmp snooping
interface
Displays IGMP snooping configuration.
show ip igmp snooping mrouter Enables automatic learning of Multicast switch ports in the context of a
specific VLAN.
show ip igmp snooping mrouter Displays information on dynamically learned Multicast router
interfaces.
show lacp ethernet Displays LACP information for Ethernet ports.
show lacp port-channel Displays LACP information for a port-channel.
show line Displays line parameters.
show ports monitor Displays port monitoring status
show power inline Displays information about inline power.
show privilege Displays the current privilege level.
show qos Displays the QoS status.
show qos interface Displays interface QoS information.
show qos map Displays all the maps for QoS.
show rmon alarm Displays alarm configurations.
show rmon alarm-table Displays the alarms table.
show rmon collection history Displays the requested history group configuration.
show rmon events Displays the RMON event table.
show rmon history Displays RMON Ethernet Statistics history.
book.book Page 77 Thursday, December 18, 2008 7:40 PM