Dell PowerConnect 3524 User Manual

Command Modes 75
show dot1x advanced Displays 802.1x enhanced features for the device or for the specified
interface.
show dot1x statistics Displays 802.1x statistics for the specified interface.
show dot1x users Displays 802.1x users for the device.
show history Lists the commands entered in the current session.
show hosts Displays the default domain name, a list of name server hosts, the static
and the cached list of host names and addresses.
show interfaces access-lists Displays access lists applied on interfaces.
show interfaces advertise Displays autonegotiation advertisement data.
show interfaces configuration Displays the configuration for all interfaces.
show interfaces counters Displays traffic seen by the physical interface.
show interfaces description Displays the description for all interfaces.
interface port-channel Displays Port-channel information.
show interfaces status Displays the status for all interfaces.
show interfaces switchport Displays switchport configuration.
show ip http Displays the HTTP server configuration.
show ip https Displays the HTTPS server configuration.
show ip interface Displays the usability status of interfaces configured for IP.
show ip ssh Displays the SSH server configuration.
show logging Displays the state of logging and the syslog messages stored in the
internal buffer.
show logging file Displays the state of logging and the syslog messages stored in the
logging file.
show management access-class Displays the active management access-list.
show management access-list Displays management access-lists.
show passwords configuration Displays information about password management.
show ports security Displays the port-lock status.
show ports security addresses Displays current dynamic addresses in locked ports.
show ports storm-control Displays the storm control configuration.
show radius-servers Displays the RADIUS server settings.
show running-config Displays the contents of the currently running configuration file.
show snmp Displays the SNMP status.
show snmp engineid Displays the local SNMP EngineID.
book.book Page 75 Thursday, December 18, 2008 7:40 PM

Dell PowerConnect 3524 Specifications

General

Throughput	9.5 Mpps
Number of queues	4
MAC address table	8000 entries
Maximum data transfer rate	0.1 Gbit/s
Supported data transfer rates	10/100 Mbps
10G support	No
Number of VLANs	256
Flow control support	Yes
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad
Input frequency	50/60 Hz
Weight (imperial)	11 lbs
Dimensions (WxDxH)	440 x 257 x 43.2 mm
Networking features	Gigabit Ethernet, Fast Ethernet
Authentication method	RADIUS, TACACS+
Connectivity technology	Wired
Dimensions (W x D x H) (imperial)	17.3 x 10.12 x 1.7 \
Switch type	Managed
Switch layer	L2
Data link protocols	Ethernet
Supported network protocols	HTTP, HTTPS/SSL, SSH
Power connector	DC-in jack
Gigabit Ethernet (copper) ports quantity	2
Basic switching RJ-45 Ethernet ports quantity	24
Product color	Black
Power source	AC
Input voltage	100 - 240 V
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	5000 g