332 RMON Commands
Command Mode
User EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the RMON event table.
The following table describes significant fields shown above:
Console> show rmon events
Index Description Type Community Owner Last time sent
----- ----------- -------- --------- ------- --------------
------
1 Errors Log CLI Jan 18 2002
23:58:17
2 High
Broadcast
Log-Trap device Manager Jan 18 2002
23:59:48
Field Description
Index An index that uniquely identifies the event.
Description A comment describing this event.
Type The type of notification that the device generates about this event. Can have the
following values: none, log, trap, log-trap. In the case of log, an entry is made in the
log table for each event. In the case of trap, an SNMP trap is sent to one or more
management stations.
Community If an SNMP trap is to be sent, it is sent to the SNMP community specified by this
octet string.
Owner The entity that configured this event.
Last time sent The time this entry last generated an event. If this entry has not generated any
events, this value is zero.
book.book Page 332 Thursday, December 18, 2008 7:40 PM