Emerson Mentor MP User Manual

Parameter structure
Keypad and display
Parameter x.00
Parameter
description
protocol
Performance
Typical
example
parameter
The
top
row
gives
the
menu.parameter
number
and
the
parameter
name.
The
other
rows
give
the
following
information.
The
coding
defines
the
attributes
of
the
parameter
as
follows:
format
Advanced parameter
descriptions
Serial comms
4 Parameter description format
The following sections provide descriptions for the advanced parameter set. Each parameter displays the following information block as shown below.
Coding
NOTE
This guide will show all bit parameters (with the Bit coding), as having a parameter range of "0 to 1", and a default value of either "0" or "1". This
reflects the value seen through serial communications. The bit parameters will be displayed on the SM-Keypad or SM-Keypad Plus (if used) as being
"OFF" or "On" ("OFF"= 0, "On" = 1).
Mentor MP Advanced User Guide 17
Issue Number: 4 www.onxcontrol.com
Coding
Attribute
Bit
1
bit
parameter
SP
Spare:
not
used
FI
Filtered:
some
parameters
which
can
have
rapidly
changing
values
are
filtered
when
displayed
on
the drive keypad for easy viewing.
DE
Destination:
indicates
that
this
parameter
can
be
a
destination
parameter.
Txt
Text:
the
parameter
uses
text
strings
instead
of
numbers.
VM
Variable
maximum:
the
maximum
of
this
parameter
can
vary.
DP
Decimal
place:
indicates
the
number
of
decimal
places
used
by
this
parameter.
ND
No
default:
when
defaults
are
loaded
(except
when
the
drive
is
manufactured
or
on
EEPROM
failure) this parameter is not modified.
RA
Rating
dependent:
this
parameter
is
likely
to
have
different
values
and
ranges
with
drives
of
different voltage and current ratings. Parameters with this attribute will not be transferred to the
destination drive by SMARTCARDs when the rating of the destination drive is different from the
source drive and the file is a parameter file.
NC
Not
copied:
not
transferred
to
or
from
SMARTCARDs
during
copying.
NV
Not
visible:
not
visible
on
the
keypad.
PT
Protected:
cannot
be
used
as
a
destination.
US
User
save:
saved
in
drive
EEPROM
when
the
user
initiates
a
parameter
save.
RW
Read/write:
can
be
written
by
the
user.
BU
Bit
default
one/unsigned:
Bit
parameters
with
this
flag
set
to
one
have
a
default
of
one
(all
other
bit
parameters have a default of zero. Non-bit parameters are unipolar if this flag is one.
PS
Power-down
save:
parameter
automatically
saved
in
drive
EEPROM when the under volts (UV) trip occurs.
1.14
Reference selector
Coding
Bit
SP
FI
DE
Txt
VM
DP
ND
RA
NC
NV
PT
US
RW
BU
PS
1
1
1
1
Range
0 to 6
Default
0 (A1.A2)
Second motor
parameter
Pr 21.03
Update rate
4
ms
read

Emerson Mentor MP Specifications

General

Brand	Emerson
Model	Mentor MP
Category	DC Drives
Language	English