To Next PageTo Next PageTo Previous PageTo Previous Page
How to troubleshoot no power issue on Furuno Boating Equipment?
If the POWER lamp on the communication unit of your Furuno Boating Equipment does not illuminate, indicating no power, there are several things to check: * Verify the fuse hasn't blown. * Ensure the power connector is securely fastened. * Inspect the power cable for rust or damage. * Confirm the ship's battery voltage is within the range of 10.8 - 31.2V DC.
Why nothing displays on the handset screen of my Furuno Boating Equipment?
To resolve the issue of nothing displaying on the handset screen of your Furuno Boating Equipment, verify that the handset cable is properly connected to the communication unit and ensure the brightness level of the screen is not set too dark.
What to do if Furuno Boating Equipment does not become [Ready] status?
To resolve the issue of your Furuno Boating Equipment not reaching [Ready] status, check the following: * Ensure the antenna cable is properly connected. * Verify there are no obstructions blocking the signal between the antenna and the satellite. * Check if the ship position data is correct (if “No fix” or “No data” appears). * In the Web software, navigate to Main ? satellite search to perform a manual satellite search. * In the Web software, go to Settings ? Basic Settings ? GPS to confirm the backup GPS is configured correctly.
How to troubleshoot internal call issues on Furuno Boating Equipment?
To resolve the issue of not being able to make internal calls on your Furuno Boating Equipment, take the following steps: * Check that the handset and/or analog phone cables are properly connected to the communication unit. * If using an analog phone, check the phone number in the Web software by navigating to Settings ? Basic settings ? Analog ports to ensure it is correct. * In the web software, go to Settings ? PBX settings ? Extension to verify that "Outside" or "Incoming" does not appear in the [Call limit] setting. * Confirm that the same extension number and password are entered in both the handset and web software. For the handset, go to Settings ? 3 SIP ? 1 Client set. In the web software, go to Settings ? PBX settings ? Extension.
What to do if Furuno Boating Equipment handset keys do not respond?
To resolve the issue of the handset keys not responding on your Furuno Boating Equipment, push and hold the key for 3 seconds to restart the handset. If the keys still do not respond after the restart, it is recommended to contact your dealer.
How to fix internet connection issues on Furuno Boating Equipment?
To resolve the issue of being unable to use the internet on your Furuno Boating Equipment, check that the handset screen displays [D: Connected] and the Web software displays [Data connection Connected]. Also, check the internet connection settings on your PC.
Why is incoming indicator silent on Furuno Boating Equipment?
To address the issue of the incoming indicator not sounding on your Furuno Boating Equipment: * Check that the cable between the incoming indicator and the Communication unit is correctly connected. * Adjust the incoming indicator volume by pressing S to increase it. * In the Web software, navigate to Settings ? Basic settings ? Incoming indicator (enabled service) and verify if Voice (telephone), FAX, ISDN UDI, ISDN RDI (UDI/RDI FELCOM 500 only) are checked.
How to stop wavy printing of the fax with Furuno Boating Equipment?
To reduce the vibration causing wavy printing on faxes from your Furuno Boating Equipment, place anti-vibration material under the fax machine.
What to do if Furuno Boating Equipment takes a lot of time to communicate with fax?
To address the issue of slow fax communication with your Furuno Boating Equipment, activate the safety communication mode on FAX-2840, referring to the operator’s manual of the fax.
What to do if my Furuno Boating Equipment has no power?
If the POWER lamp on the communication unit of your Furuno Boating Equipment doesn't illuminate, try the following: * Check if the fuse has blown. * Check if the power connector has loosened. * Check if the power cable is rusted or damaged. * Check if the power cable is damaged. * Verify that the voltage of the ship battery is within the range of 10.8 - 31.2V DC.
General| Operating Temperature | -15°C to +55°C |
|---|---|
| Communication System | Inmarsat |
| Data Reporting | Yes |
| Tracking | Yes |
| Voice Support | Yes |
| SMS Support | Yes |
| Frequency | 1.6 GHz |
| Power Supply | 12-24 VDC |
| Interface | Ethernet |
