Garmin G1000 Pilot's Guide

Garmin G1000 Pilot’s Guide for the Diamond DA42NG
190-00962-04 Rev. A34
SYSTEM OVERVIEW
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
SYSTEM SETTINGS
G1000 system settings are managed from the System Setup Page. The following settings can be changed:
• Date/time
• Display Units
(see Flight Instruments Section)
• Baro Transition Alert (see Flight Instruments
Section)
• Airspace alerts (see Flight Management Section)
• Arrival alerts (see Flight Management Section)
• Audio Alerts
• MFD Data Bar Fields
(see Flight Management Section)
• CDI scaling for GPS navigation source
(see Flight Instruments Section)
• COM channel spacing
(see Audio Panel and CNS Section)
• Criteria for displaying nearest airports
(see Flight Management Section)
Restoring system setup defaults:
1) Use the FMS Knob to select the AUX - System Setup Page.
2) Press the DFLTS Softkey.
Or:
a) Press the MENU Key.
b) Highlight ‘Restore Defaults’ and press the ENT Key.
Figure 1-29 AUX - System Setup Page

Garmin G1000 Specifications

General

Brand	Garmin
Model	G1000
Category	Avionics Display
Language	English