6-7190-01007-03 Rev. C
GTN 725/750 Pilot’s Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
6.3 Selecting an Arrival
A Standard Terminal Arrival (STAR) can be loaded at any airport that has one
published. Only one arrival can be loaded at a time in a flight plan. If an arrival
is loaded when another arrival is already in the active flight plan, the new arrival
replaces the previous arrival. The route is defined by selection of an arrival, the
transition waypoint, and a runway.
1. Touch the PROC key on the Home page and then touch the
Arrival key.
Touch To Select
Airport
Touch To Show
Arrival List
Figure 6-7 Arrival Page
2. Confirm that the intended airport is shown or touch the
Airport key and select the desired airport. Touch the key for
the desired Arrival.
Touch To Select
Arrival
Figure 6-8 Arrival List
To Next Page
Loading...
Need help?
General