16-23190-01007-03 Rev. C
GTN 725/750 Pilot’s Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
16.5 Alerts Settings
The Alerts Setup page controls two functions: Arrival Alerts and Airspace
Alerts. Arrival Alerts, when active, will generate a message when the aircraft
is within the selected proximity of the destination. Airspace Alerts generate a
message and filtering of the Nearest Airspace list. The altitude component of
Airspace Alerts are dependent on both aircraft and airspace altitude and the
values set for the Altitude Buffer.
Touch to Select
Distance Values
Selected Airspace
Type (green bar)
Airspace
Altitude Buffer
Arrival
Figure 16-27 Alerts Setup Page
1. While viewing the System page, touch the Alerts key.
2. Touch the Arrival key to toggle activation. A green bar will
appear when it is active.
3. Touch the Proximity key to set the Proximity distance values.
A numeric keypad will appear. Select the desired values and
then touch Enter.
To Next Page
Loading...
Need help?
General