10-6
GTN 725/750 Pilot’s Guide
190-01007-03 Rev. C
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
10.3.3 Displaying Traffic on the Traffic Page
1. From the Home page, touch the Traffic key.
2. Confirm TIS is in Operating Mode.
3. Touch the Traffic Status key to toggle between Operate and
Standby mode.
10.3.4 Altitude Display
1. While viewing the Traffic page, touch the Operate key to begin
displaying traffic. “Operate” is displayed in the Traffic Status
field.
2. Touch the Altitude Filter key to change the altitude volume.
Select
the desired altitude volume by touching the
BELOW,
NORMAL, ABOVE, or UNRESTRICTED keys. The selection
is displayed in the Altitude mode field.
Selected Altitude Filter
Figure 10-6 Traffic Altitude Filter Page
Altitude Mode Displayed Traffic Range
Below -9900 ft to 2700 ft
Normal -2700 ft to 2700 ft
Above -2700 ft to 9900 ft
Unrestricted All Traffic Shown
Table 10-2 Displayed Traffic Range
To Next Page
Loading...
Need help?
General