9-32
GTN 725/750 Pilot’s Guide
190-01007-03 Rev. C
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
9.3.3 Graphically Edit Flight Plan Mode
The Edit Flight Plan Mode allows making quick changes to the active flight
plan directly on the display. The process is simply touching the display to start
Map Pan Mode, touching the Graphically Edit FPL key, dragging the desired
leg to a new waypoint or airway, and touching the Done key. At any point, a
step may be removed by touching the Undo key or the whole process ended by
touching the Cancel key. The Undo key will remove up to nine steps.
9.3.3.1 Adding a Waypoint Within an Existing Flight Plan
1. Touch the Map page display. The Map Mode selection keys
will appear. Touch the Graphically Edit FPL key.
Active Flight Plan
Touch To Return To
The Map Display
Map Pointer Where
Display Was Touched
Touch Edit Flight Plan
Key To Change FPL
Figure 9-35 Edit Flight Plan Mode
2. Touch and hold the desired leg of the flight plan.
Active Flight Plan Leg
Touch To Cancel
Changes And Return
To Map Display
Current Active
FPL Waypoints
Intended New Waypoint
Figure 9-36 Select Leg of Flight Plan to Change
To Next Page
Loading...
Need help?
General