Garmin GTN 725 User Manual

16-26
GTN 725/750 Pilot’s Guide
190-01007-03 Rev. C
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
16.6.2 Setting a User-Configured (Manual) Nav Angle
There are three variation (heading) options: Magnetic, True, and User. If
“Magnetic” is selected, all track, course and heading information is corrected
to the magnetic variation computed by the GPS receiver. The “True” setting
references all information to true north. The “User” selection allows the pilot to
enter values between 0º and 179º E or W.
NOTE: When changing the Nav angle, the DTK on the Flight Plan page
for an approach does not change until that approach is reloaded.
1. While viewing the System page, touch Units key.
2. Touch the Nav Angle key and then the User key.
Touch to select User
(manual) mag var
Figure 16-32 Nav Angle Selections
3. After User is selected, touch the Magnetic Variation key to
set the value.
Touch to set
manual mag var
Figure 16-33 Magnetic Variation is Available for Editing

Garmin GTN 725 Specifications

General

Brand	Garmin
Model	GTN 725
Category	GPS
Language	English