Garmin GTN 725 User Manual

2-4
GTN 725/750 Pilot’s Guide
190-01007-03 Rev. C
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
2.1.8 Selecting a Squawk Code
The selected squawk code will always be in use. As you change a squawk
code, the original code will be used until you are finished selecting the new
code.
Squawk Code Description
1200 Default VFR code in the USA
7500 Hijacking
7600 Loss of Communications
7700 Emergency
Table 2-1 XPDR Special Squawk Codes
1. Touch the transponder squawk code window at the top of the
display.
2. The XPDR page will be displayed. The Squawk Code value will
be active for selection for use by the active Transponder.
Active Squawk
Code Selection
Transponder Is In
Standby Mode
Figure 2-8 XPDR Squawk Code Selection Display

Garmin GTN 725 Specifications

General

Brand	Garmin
Model	GTN 725
Category	GPS
Language	English