15-5190-01007-03 Rev. C
GTN 725/750 Pilot’s Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
15.1.1 Target Altitude
This sets the desired ending altitude for the VCALC setup.
1. While viewing the VCALC page, touch Target ALT.
Numeric
Keypad
Selected
Altitude
Backspace
Key
Figure 15-6 Select VCALC Target Altitude
2. Use the numeric keypad to select the desired Target Altitude
and then touch the Enter key.
15.1.2 Altitude Type
This value selects the altitude reference that will be used for VCALC
calculations.
1. While viewing the VCALC page, touch Altitude Type.
2. Touching the Altitude Type key will toggle between MSL and
Above WPT. "Above WPT" is only available for waypoints that
are airports.
To Next Page
Loading...
Need help?
General