15-10
GTN 725/750 Pilot’s Guide
190-01007-03 Rev. C
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
15.2 Flight Timers
The Flight Timers function provides count up/down timers, plus automatic
recording of departure time, and total trip time. Departure and total trip time
recording can be configured to run either any time unit power is on, or only
when your ground speed exceeds the in-air threshold set by the installer (for
example, 30 knots). A flexible Generic Timer is available for general timing
needs.
NOTE: When a count up timer is used, the preset value has no function.
1. While viewing the Utilities page, touch the Flight Timers
key.
Departure Time
(Local Time)
Selected
Counter
Direction
Elapsed
Time
Start/Stop Generic Timer Reset or Preset Timer
Select Preset
Time
Set Departure Time
To Current Local
Time Of Timer Start
Select
Criteria For
Timer Start
Reset Timer
Figure 15-11 Utility Flight Timers Page
2. If the Generic Timer Direction counter is set to "Up," the Reset
Timer key will be shown and when touched will return the
timer to 00:00:00. If the Direction counter is set to "Down,"
the Preset Timer key will be shown and the key will return the
timer to the Preset time value.
3. Touch each key as desired to set up timer operation.
To Next Page
Loading...
Need help?
General