•
'Display Format'
on page 7-8
•
'Display Size'
on page 7-8
The [Freeze] key stops the 2D image and MCF mode trace.
Note
By pressing the [Freeze] key again, the MCF-cursor appears on the active 2D image.
7.4.2.3 MCF Gain Control
The adjustment of the Gain control determines the amount of amplification applied to the
received echoes. All received echoes are amplified with the same gain value regardless of the
scan depth.
Rotate the [M Mode] key and/or the [CF Mode] key to adjust the gain (brightness) of the
entire image.
Note: The [M]
Gain function influences the M trace brightness only. The [C] Gain function
influences the color saturation only.
Remarks:
•
The current gain value is displayed on the screen [GN ...].
7.4.2.4 Invert
For more information see
'Invert'
on page 8-37.
7.4.2.5 Wall Motion Filter (WMF)
For more information see
'Wall Motion Filter (WMF)'
on page 8-41.
7.4.2.6 Velocity Range (PRF)
For more information see
'Velocity Range (PRF)'
on page 8-40.
7.4.2.7 MCF Cineloop
For more information see
'M Cineloop'
on page 7-6.
7.4.3 MCF Sub Menu
The “MCF Main” menu has to be active.
Select the key [Sub MCF] key. The MCF Submenu appears.
M Mode
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4 7-11
To Next Page
Loading...
Need help?
General
