9.2.1 3D Acquisition During Active High Resolution Zoom
1. Press the [Zoom] button, while still in 2D.
2. Place the zoom box over the region of interest
The trackball has 2 functions: adjusting position and size of the zoom box. The activated
function is displayed in the status bar area on the monitor.
Press the upper trackball key to change the function of the trackball from position to size or
vice versa.
3. Change the size of the zoom box by moving the trackball.
Moving:
↑ decrease the box size in vertical direction
↓ increase the box size in vertical direction
→ increase the box size in horizontal direction
← decrease the box size in horizontal direction
4. Activate Zoom by either selecting [PanZoom] or [HDZoom] with the left or right trackballkey.
5. The overview window appears. To readjust overview window settings,
'General'
on page 13-
15
6. Press the [3D] or [4D] key to activate Volume mode.
Remark: The overview window is hidden when 3D/4D mode is activated
without acquiring a volume.
Operation:
For more information see
'Volume Acquisition: Static 3D Sectional Planes'
on page 9-16.
For more information see
'Volume Acquisition: Static 3D Render'
on page 9-48.
Volume Mode
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4 9-19
To Next Page
Loading...
Need help?
General
