GE Voluson S6 User Manual

2.6.7.5 Planned Maintenance
The following maintenance schedule is suggested for the system, probe and reusable biopsy /
biopsy bracket to ensure optimum operation and safety.
Do the Following Daily After Each Use As Necessary
Inspect the Probes X X
Clean the Probes X X
Disinfect Probes X X
After cleaning and disinfection, inspect the probe’s lens, cable, casing and connector. Look for
any damage that would allow liquid to enter the probe. Also, inspect the probe functionality by
live scan. If any damage is found, do not use the probe until it has been inspected and
repaired/replaced by a GE service representative.
2.6.7.6 Environmental requirements for Probes
Probes must be operated, stored, or transported within the parameters outlined below.
Ensure that the probe face temperature does not exceed the normal operation temperature
range.
Avoid temperatures above 50ºC
Safety
2-18
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4

GE Voluson S6 Specifications

General

Brand	GE
Model	Voluson S6
Category	Diagnostic Equipment
Language	English