Describes precautions necessary to prevent the risk of injury through moving or tipping
hazard!
Describes precautions necessary to prevent the risk of injury through mechanical hazard!
2.1 Warning labels used in the Basic User Manual
2.2 Symbols and Labels used on the system
Some symbols and labels used with electrical medical equipment have been accepted as
standard by IEC. They serve for marking connections, accessories, and as warnings.
Stand-by Insulated patient application part
(Type BF)
Mains power(Circuit Breaker) switch
ON
Mains power(Circuit Breaker) switch
OFF
Do not use the following devices near
this equipment: cellular phone, radio
receiver, mobile radio transmitter,
radiocontrolled toy, broadband power
lines,etc. Use of these devices near
this equipment could cause this
equipment to perform outside the
published specifications. Keep power
to these devices turned off when near
this equipment.
Protective earth (ground) connection
Potential equilibrium connection UL conformity mark according to UL
60601-1 and CAN/CSA C22/2 NO.
601.1:
Protection against the effects of
immersion
Caution, consult
accompanyingdocuments.This symbol
advises the reader toconsult the
accompanyingdocuments for
important safety related information
such as warnings and pre-cautions
thatcannot be presented on the
device itself.
Dangerous electric voltage. Unplug
the main plug before opening the
system!
Disposal:
'Disposal'
on page 2-24
Safety
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4 2-3
To Next Page
Loading...
Need help?
General
