EasyManuals Logo
Home>Keithley>Measuring Instruments>2600B

Keithley 2600B User Manual

Keithley 2600B
897 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #463 background imageLoading...
Page #463 background image
Section
7: TSP command reference Series 2600B System SourceMeter® Instrument
Reference Manual
7-124 2600BS-901-01 Rev. C / August 2016
Details
This attribute is an array of DNS (domain name system) server addresses. These addresses take
priority for DNS lookups and are consulted before any server addresses that are obtained using
DHCP. This allows local DNS servers to be specified that take priority over DHCP-configured global
DNS servers.
You can specify up to two addresses. The address specified by 1 is consulted first for DNS lookups.
dnsAddress must be a string specifying the DNS server’s IP address in dotted decimal notation.
Unused entries are returned as "0.0.0.0" when read. To disable an entry, set its value to
"0.0.0.0" or the empty string "".
Although only two address may be manually specified here, the instrument will use up to three DNS
server addresses. If two are specified here, only one that is given by a DHCP server is used. If no
entries are specified here, up to three addresses that are given by a DHCP server are used.
Example
dnsaddress = "164.109.48.173"
lan.config.dns.address[1] = dnsaddress
Configure DNS address 1 to
"164.109.48.173"
Also see
lan.config.dns.domain (on page 7-124)
lan.config.dns.dynamic (on page 7-125)
lan.config.dns.hostname (on page 7-125)
lan.config.dns.verify (on page 7-126)
lan.restoredefaults() (on page 7-132)
lan.config.dns.domain
Configures the dynamic DNS domain.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (RW) Yes LAN restore defaults Nonvolatile memory ""
Usage
domain = lan.config.dns.domain
lan.config.dns.domain = domain
domain
Dynamic DNS registration domain; use a string of 255 characters or less
Details
This attribute holds the domain to request during dynamic DNS registration. Dynamic DNS
registration works with DHCP to register the domain specified in this attribute with the DNS server.
The length of the fully qualified host name (combined length of the domain and host name with
separator characters) must be less than or equal to 255 characters. Although up to 255 characters
are allowed, you must make sure the combined length is also no more than 255 characters.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Keithley 2600B and is the answer not in the manual?

Keithley 2600B Specifications

General IconGeneral
BrandKeithley
Model2600B
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals