.
OPERATION
OPERATION
OPERATIONS AND CHECKS BEFORE STARTING ENGINE
WARNING
When starting the engine, check and make sure the work equipment
lock lever (4) and parking brake lever (1) are secured in the LOCK
position.
If the control levers are not locked and they are touched by accident
when starting the engine, the work equipment may move unexpectedly,
and this may lead to a serious injury or death.
When standing up from the operator's seat, always set the work
equipment lock lever (4) and parking brake lever (1) to the LOCK
position, regardless of whether the engine is running or stopped.
1. Check that parking brake lever (1) is in the LOCK position.
REMARK
If this parking brake lever is not in the LOCK position, the engine
will not start.
2.
Check that steering, forward-reverse, gear shift lever (2) is in
the N (neutral) position.
REMARK
The engine cannot be started if steering, forward-reverse, gear
shift lever (2) is not in the N (neutral) position.
If steering, forward-reverse, gear shift lever (2) is in FORWARD
or REVERSE, the letter P on display panel A will flash.
3 - 93
To Next Page
Loading...
Need help?
General
