.
MAINTENANCE
SERVICE PROCEDURE
CHECKING FOR LOOSENESS OF HIGH-PRESSURE CLAMP, HARDENING OF RUBBER
Check visually and touch with your fingers to check that there are no loose bolts or hardening of rubber parts at
clamps (1) to (10). If there is any looseness or hardened rubber, contact your Komatsu distributor for replacement.
NOTICE
If the engine continues to be used when there are loose bolts, hardened rubber, or missing parts, there is danger of damage or
breakage occurring due to vibration and wear at the connections of high-pressure piping. Always check that the proper
high-pressure piping clamps are correctly installed.
4 - 71
To Next Page
Loading...
Need help?
General
