.
OPERATION
TRANSPORTATION
METHOD OF LIFTING MACHINE
WARNING
The person using the crane to carry out lifting operations must be a qualified crane operator.
Never carry out lifting operations if any person is on the machine being lifted.
Always use a wire rope that has ample strength for the weight of the machine being lifted.
Keep the machine horizontal when lifting it.
When carrying out lifting operations, set the work equipment lock lever and parking brake lever to the LOCK position to prevent
the machine or work equipment from moving unexpectedly.
Never enter the area under or around a raised machine.
There is danger of the machine losing its balance.
Use the procedure below to set the machine in the proper posture and use the lifting equipment when lifting the machine.
NOTICE
This method of lifting applies to the standard specification machine.
The method of lifting differs according to the attachments and options installed.
For details of the procedure for machines that are not the standard specification, please consult your Komatsu distributor.
For weight, see "SPECIFICATIONS (PAGE 5-2)".
When lifting the machine, stop it on a level place, then observe the following procedure.
1.
Stop the engine and set the parking brake lever to the LOCK
position (L) securely.
2.
Set the work equipment lock lever to the LOCK position (L)
securely.
3 - 135
To Next Page
Loading...
Need help?
General
