.
MAINTENANCE
SERVICE PROCEDURE
SERVICE PROCEDURE
INITIAL 250 HOURS SERVICE (ONLY AFTER THE FIRST 250 HOURS)
Perform the following maintenance only after the first 250 hours.
Replace power train oil filter element
Change power train case oil and wash strainer (power train pump strainer, scavenging pump strainer)
Change oil in final drive case
Change oil in hydraulic tank, replace hydraulic oil filter element, clean hydraulic tank strainer
For details of the methods of maintenance, see EVERY 500 HOURS SERVICE, EVERY 1000 SERVICE, EVERY
2000 HOURS SERVICE.
4 - 19
To Next Page
Loading...
Need help?
General
