.
SAFETY
PRECAUTIONS FOR OPERATION
PARKING MACHINE
Park the machine on level ground where there is no danger of
falling rocks or landslides, or of flooding if the land is low, and
lower the work equipment to the ground.
If it is necessary to park the machine on a slope, set the blocks
under the tracks to prevent the machine from moving, then dig
the work equipment into the ground.
When leaving the machine, set the work equipment lock lever
and parking brake lever to the LOCK position, stop the engine,
and use the key to lock all the equipment. Always remove the
key and take it with you.
Work equipment posture: See "PARKING MACHINE (PAGE
3-124)".
Locks: See "LOCKING (PAGE 3-126)"
Always close the door of the operator's compartment.
2 - 22
To Next Page
Loading...
Need help?
General
