.
OPERATION
OPERATION
STEERING MACHINE
WARNING
Avoid as much as possible turning the machine on a slope.
The machine will tend to slip sideways. Particular care should be taken on soft or clay soil.
Never make a pivot turn at high speed.
NORMAL TURNING
WARNING
When performing a counterrotation turn, the feeling of operation when your head is facing the rear is different from the feeling if
you are facing the front. Never carry out a counterroatation turn while facing the rear.
To turn the machine while traveling, incline steering,
forward-reverse, gear shift lever (1) in the direction of the turn.
TURNING GRADUALLY TO LEFT WHILE TRAVELING FORWARD
NOTICE
If the lever is moved partially to the forward or reverse position and then is
moved in the direction of turn, the machine may carry out a counterrotation
turn, so operate the lever fully to the forward or reverse position.
If steering, forward-reverse, gear shift lever (1) is moved to the
FORWARD position (F) and moved partially to the left (L), the
machine will start to turn gradually. After that, the lever can be
moved further towards the end of its travel to set the desired
turning radius.
REMARK
To turn gradually to the right while traveling forward, if the steering,
forward-reverse, gear shift lever (1) is operated to the FORWARD
position (F) and moved slowly to the right, the machine will start to
turn gradually. After that, the lever can be moved further towards
the end of its travel to set the desired turning radius.
3 - 113
To Next Page
Loading...
Need help?
General
