.
OPERATION
OPERATION
STOPPING MACHINE
WARNING
Avoid stopping suddenly. Give yourself ample room when stopping.
When stopping the machine, select flat hard ground and avoid
dangerous places. If it is unavoidably necessary to park the machine on
a slope, place the parking brake lever (1) in the LOCK position and insert
blocks underneath the track shoes. As an additional safety measure,
thrust the blade into the ground.
If the work equipment control lever is touched by accident, the work
equipment may suddenly move, and may cause damage, serious injury,
or death. Before leaving the operator's seat, always secure work
equipment lock lever (2) in the LOCK position.
1. Depress brake pedal (3) to apply the brake.
NOTICE
If the brake is depressed when the engine speed or travel speed is high, the
brake disc may make a slipping sound. Normally, depress decelerator
pedal (4) to reduce the engine speed and travel speed before depressing
the brake.
2.
Set joystick (5) in the neutral position.
3 - 106
To Next Page
Loading...
Need help?
General
