.
ATTACHMENTS, OPTIONS
SELECTION OF TRACK SHOE
SELECTION OF TRACK SHOE
Select suitable track shoes to match the operating conditions.
METHOD OF SELECTING SHOES
If a wider shoe than necessary is used, the load on the track will increase, and this will cause the shoes to bend, links
to crack, pins to break, shoe bolts to come loose, and various other problems.
Category Use Precautions when using
A
Bedrock,
normal soil
This shoe can be used for a wide range of work from crushed rock to general civil
engineering work such as reclamation of residential land. There is no particular limit
to its use.
B Normal soil
Use this shoe for general soil, such as where the main work is scraper work and
pusher work, reclaiming land for golf courses, or stripping the overburden for coal
mines. This shoe cannot be used on bedrock. On jobsites where there are rocks in
the soil, be careful to avoid letting the machine mount the rocks.
CSoft soil
Use this shoe on soft ground where the shoe in category B sinks into the ground.
Do not use this shoe on jobsites where there are rocks in the soil.
D
Extremely
soft ground
(swamp)
With A, B, or C, use these shoes only in places where the machine sinks.
These shoes cannot be used on rough ground where there are large obstacles
such as boulders or fallen trees.
Travel at Hi or Mi speed only on flat ground, and if it is impossible to avoid going
over obstacles, shift down and travel at half speed in Lo.
REMARK
Use heavy single shoes for machines operating in category A (rocky ground).
Using heavy single shoes in categories B or C will help to improve the wear life.
D85EX-15 D85PX-15
Specifications Category Specifications Category
Standard 560mm Single A 910mm Swamp D
Option 610mm Single B --- ---
Option 660mm Single C --- ---
Option 560mm Heavy single A --- ---
Option 610mm Heavy single B --- ---
Option 660mm Heavy single C --- ---
6 - 3
To Next Page
Loading...
Need help?
General
