.
OPERATION
OPERATION
PRECAUTIONS WHEN OPERATING BLADE
METHOD OF USING BLADE LIFT CYLINDER
Do not carry out back grading operations with the cylinder fully extended. There is high risk that an excessive load
will be brought to bear on the cylinder.
PRECAUTIONS ON SLOPE
BE CAREFUL OF FUEL LEVEL
If the fuel level in the fuel tank becomes low when the machine is working on slopes, the engine may suck in air
because of the angle of the machine or the swaying of the machine. This may make the engine stop, so be careful
not to let the fuel level in the fuel tank become too low.
When working on slopes where the angle of the machine is more
than 20°, if the 2nd level of the fuel gauge lights up, add fuel
immediately.
(A): Red range
(B): Green range
BE CAREFUL OF OIL LEVEL
When operating machine on sloped areas of more than 20°, fill all appropriate components with oil to H level.
PRECAUTIONS WHEN ENGINE STOPS ON SLOPE
If the engine stops while working or traveling on a hill, immediately depress the brake pedal to bring the machine to
a complete stop.
3 - 116
To Next Page
Loading...
Need help?
General
