.
OPERATION
EXPLANATION OF COMPONENTS
ENGINE COOLANT TEMPERATURE GAUGE
NOTICE
If the coolant temperature gauge often enters red range (C), check the radiator for clogging.
Gauge (1) indicates temperature of the engine coolant.
If the temperature is normal during operation, green range (B) will
light.
If red range (C) lights during operation, move the fuel control dial to
lower engine speed to approx. 3/4 of the full speed, and run until
the coolant temperature enters green range (B).
During operation, if red range (C) lights, engine coolant
temperature monitor flashes and the alarm buzzer sounds, stop
the machine and run at low idle until coolant temperature enters
green range (B).
(A): White range
(B): Green range
(C): Red range
POWER TRAIN OIL TEMPERATURE GAUGE
NOTICE
If the power train oil temperature gauge often enters red range (C), shift down one speed range to reduce the load on the power
train when operating.
Gauge (2) indicates the torque converter outlet oil temperature.
If the temperature is normal during operation, green range (B) will
light.
If red range (C) lights up during operation, move the fuel control dial
to lower engine speed to approx. 3/4 of the full speed, reduce the
load and run until the oil temperature enters green range (B).
If red range (C) lights up, the power train oil temperature caution
lamp flashes and the alarm buzzer sounds during operations, stop
the machine, and run the engine at low idling until the oil
temperature goes down to green range (B).
(A): White range
(B): Green range
(C): Red range
3 - 14
To Next Page
Loading...
Need help?
General
