5
Printing Operation
5-16 bizhub PRO 1050P
5.5.5 To Check/Control Spool Jobs
Use this function to display spool jobs as a list.
The list includes following information.
- Job No.: consecutive number of print job
- Mode: Wait for RIP or Receiving (current status of the spool job)
Follow the procedure below to change the output order or delete the spool
jobs.
1 Touch [JOB LIST] tab, then touch [Spool].
- Check the status of the spool jobs.
- Touch [Next] to scroll, if 8 or more jobs are entered.
2 Select the desired job, then select the job operation.
%
To specify the next job to be printed:
Touch to highlight the desired job key, then touch [Print Next].
The highlighted job will be moved just under the current print job.
!
Details
This will not function if printing operation has already been started for the
selected job.
To Next Page
Loading...
Need help?
General
