13
Machine Manager Setting
13-10 bizhub PRO 1050P
13.2.3 03 Weekly Timer Setting
This function can be accessed only by the machine manager.
The Weekly Timer is a machine management function that shuts down power
to the machine on a daily or hourly basis, and can be programmed specifi-
cally for lunch breaks, weekends and holidays, or any time the copier is not
required.
In addition, Timer Interrupt can be enabled (with or without a password re-
quirement) to allow temporary use of the machine during periods when pow-
er is shut down by the Timer function.
If the Weekly Timer needs to be activated on your machine, contact your
service representative.
Conditions required to use the Weekly Timer
- The power plug is inserted into the socket.
- The power switch is turned on.
- The current date and time are correctly set.
To Next Page
Loading...
Need help?
General
